Product Description

Cmoonlight only focus our attention on all in one solar street lights, so we can invest more time and money on R&D and quality control of all in one solar street lights, The more we pay on solar lighting, the more we will gain on solar lighting.


 

Product Info

Minorder 1

Product Detail

All in One Solar led street lights specifications
 

PIR motion sensor working mode

when someone come, it will work with 100% brightness, 45s later, it will work with 30% brightness for energy saving.

Time control working mode: 4 hrs 100% + 3 hrs 50% +3 hrs 25%.

Light control: The light will turn on automatically when sunset, and turn off when sun rises.


LifePO4 battery

Over 2000 times cyclic charge-discharge, over 8 years life span; good performance at high temperature resistance, eco-friendly.

MPPT controller

Overall protection (over-voltage, over-current, over-charge, over-discharge…); regulate output power intelligently and adopt to varying weather

High efficiency monocrystalline Solar panel

 

More than 20% photoelectric conversion efficiency; snow/ wind load; 25-year progressive warranty.

LED module

USA Bridgelux LED Chips, Life time over 100000 hours, High brightness and low light decay, aluminum lamp base excellent heat dissipation

Microwave sensor

Automatically regulate the light source from full bright to dim mode according to the battery storage capacity, prolong the working time of the light.

Aluminum frame structure

Complete aluminum integrated die-casting structure, anticorrosion, IP65 protection grade and IK08 wind resistance rated,effectively isolating humidity, dust, heat invasion and strong load of wind.


All in one solar street lights Attention Issues

 ⑴“All-in-one Solar street light” will not work without sun. Please choose the matched model according to the local Sunlight intensity or the total annual radiation of solar energy. In the area of lacking sunlight or in long continuous rainy days, the working time of solar lights would be shortened or can not light up, All-in-one light with mains supply or solar dual-mode electric power supply is suggested to choose in such cases.

 

 ⑵ “All-in-one Solar street light” selects long life span lithium battery as energy storage device. Discharge condition at night is at temperature - 20℃ ~ + 75℃, battery performance will be damaged beyond this range. Please make sure the local extreme temperature does not exceed the above condition when choosing the “All-in-one models”.

 

 ⑶“All-in-one Solar street light”, after fully charged, the battery longest store time can be up to six months. Check the battery in time after long time transport or storage, charge and record it on a regular time. Otherwise, the battery will be damaged.

 

⑷When installing “All-in-one Solar street light”, make the solar panel towards the direction of the sun as far as possible in order to get maximum energy and meanwhile avoid houses or the shadow of obstacles such as trees, otherwise it will reduce the generating efficiency of the solar panel, and due to a shorten working time.

 

⑸“All-in-one Solar street light”, the clean-up performance of solar panel surface also affects the generating efficiency of the solar panel. So its surface needs to be cleaned, such as dust, leaves, greasy dirt, etc., scrubbed with ordinary cleaner on a regular time is suggested.

 

 ⑹“All-in-one Solar street light”, its internal parts are with good waterproof design, all reach IP65 standard. Ventilation holes and cracks on the shell are specially designed for the cooling and drainage. Metal parts are all made of corrosion resistance aluminum or stainless steel, which can tolerate the strict environment of the sea or high heat and high humidity desert.

 

Install steps 

 

“All-in-onSolar street light”Attention Issues

 

⑴“All-in-one Solar street light” will not work without sun. Please choose the matched model according to the local Sunlight intensity or the total annual radiation of solar energy. In the area of lacking sunlight or in long continuous rainy days, the working time of solar lights would be shortened or can not light up, All-in-one light with mains supply or solar dual-mode electric power supply is suggested to choose in such cases.

 

 ⑵ “All-in-one Solar street light” selects long life span lithium battery as energy storage device. Discharge condition at night is at temperature - 20℃ ~ + 75℃, battery performance will be damaged beyond this range. Please make sure the local extreme temperature does not exceed the above condition when choosing the “All-in-one models”.

 

 ⑶“All-in-one Solar street light”, after fully charged, the battery longest store time can be up to six months. Check the battery in time after long time transport or storage, charge and record it on a regular time. Otherwise, the battery will be damaged.

 

 ⑷When installing “All-in-one Solar street light”, make the solar panel towards the direction of the sun as far as possible in order to get maximum energy and meanwhile avoid houses or the shadow of obstacles such as trees, otherwise it will reduce the generating efficiency of the solar panel, and due to a shorten working time.

 

 

⑸“All-in-one Solar street light”, the clean-up performance of solar panel surface also affects the generating efficiency of the solar panel. So its surface needs to be cleaned, such as dust, leaves, greasy dirt, etc., scrubbed with ordinary cleaner on a regular time is suggested.

 

 ⑹“All-in-one Solar street light”, its internal parts are with good waterproof design, all reach IP65 standard. Ventilation holes and cracks on the shell are specially designed for the cooling and drainage. Metal parts are all made of corrosion resistance aluminum or stainless steel, which can tolerate the strict environment of the sea or high heat and high humidity desert.

If you want tTo ensure that your all in one solar  street lights is working well, you obviously need to dig a little deeper and read more about solar street lights, product types and more.
 

 

Products Categorys

Recommend Products

Navigation