Is Cmoonlight's foldable integrated solar street light good quality & how to install Cmoonlight solar street light?





 
The main energy resources of the twentieth century, such as petroleum, natural gas, coal, and so on, are on the verge of depletion. At the same time, with increasing environmental pressure, energy conservation and environmental protection have become the development trend in a variety of industries. Solar energy, as an inexhaustible source of clean energy, will be the most ideal green energy source in the twenty-first century.

Solar photovoltaic power generation technologies are the most efficient way to convert solar energy into electrical energy. A LED Emitting Diode in solar street lights is a type of component that converts electricity into visible light. Its pollution-free properties have already been applied to lighting in a variety of fields. As a result of having the combined advantage of solar and LED solid-state lighting—-LED solar street light and solar LED lighting system is the ideal combination of new energy and new light source.

A solar street light system that combines the green-energy components of a solar panel, LED lamp, and Li-Fe battery into a single product. This all-in-one product, in conjunction with a motion detector, provides a low-energy consumption, long-lasting, high-luminance solution, as well as free maintenance for at least one year. at least five years At the same time, the intelligent controller and sensor meet different control requirements. At the same time, this product is simple to ship (one light per box) and install.

 
 
PRODUCT FEATURES
The solar panel, battery, and solar LED light are all integrated and waterproof. The shell is made of aluminum alloy and works with waterproof and airless technology, making it simple to install because no connection or wiring is required. It is dustproof, waterproof, anti-static, and shock resistant, making it suitable for use outside. Its high-quality parts extend the product's lifespan to more than 9 years. It is simple to dismount, assemble, carry, and transport. A high-efficiency solar panel provides power for an explosion-proof and heat-resistant lithium battery. High-efficient power generation, large capacity, high light efficiency, small volume, long life span, light weight and handy carrying.
 
THE BENEFITS OF THE MOST RECENT PRODUCT COB SOLAR LIGHT
COB (Chip on Board) LEDs combine a large number of LED chips on a small board. The light ray is more intense with the help of a special lens, making it appear brighter than the one produced with separate led chips. Please keep in mind that the COB chip has a low heat emission and can only be used on our 20w-80w integrated solar streetlights.

SOLAR HYBRID LIGHT
The hybrid solar light prioritises solar energy, and only when the battery is depleted does it switch to grid power. This light is widely used on our 30w to 80w solar lights, and it is installed in some power-deficient but strict road-lighting areas. An integrated design, easy to ship and with a long service life. An all-in-one product easy to install, as well as for maintenance and replacement.

Foldable All-in-One solar street light with adjustable solar panel is a one-of-a-kind design created by our R&D and design team. It's used in high-end municipal solar lighting projects like solar road lights and solar highway lights. We have structure and appearance patents, and we won the Red Dot Award from the German Industry Design Association.

All raw materials are thoroughly tested using Testing Equipment. ISO9001:2005 quality management system certification. Before shipping solar lights to any of our customers, we let them age for three days. This guarantees that the solar panels, lamp beads, controllers, and batteries are fully qualified. Other low-quality factories only assemble solar lights that do not age.

INSTALLING A CMOONLIGHT SOLAR STREET LIGHT
One of the most significant advantages of integrated solar street lights is their ease of installation. Have you ever considered installing integrated solar street lights on your own? Many articles claim that it is quick and simple. And, indeed, it is. In this article, I'll discuss Cmoonlight's all-in-one Solar Street Light products and how to install them.
This is our 2020 German new design foldable all-in-one solar street light model, which is patented by Cmoonlight. This type is appropriate for government projects or larger installations such as solar roadway lighting and solar highway lighting. cmoonlight offers designs ranging in power from 40W to 64W, 100W to 120W.

Solar streetlights are made up of solar panels, batteries, controllers, light sources, and other components. The solar street lamp assembly is built around the battery. The lifespan of the street lamp is affected by the lifespan of the battery. As summer approaches, the temperature rises sharply, affecting the energy storage of lithium batteries.

If there are still thunderstorms, the battery must be checked and maintained on a regular basis. The battery loss may be the result of the battery's long use time and normal wear and tear; it may also be the result of the construction party cutting corners during the original construction, or the low quality of the purchased cheap product; or the installation location is not very reasonable, and the green vegetation is used as a feeder.

At this point, it is usually sufficient to replace the battery with a new one or to cut the green plants that are covering it off. The lithium battery whose capacity is insufficient to meet the usage requirements should be replaced as soon as possible to avoid interfering with the normal operation of solar-powered devices.

The sun rises from the south in the northern hemisphere, but the sun rises from the north in the southern hemisphere. That is why we must design solar panel fold and unfold to ensure that the solar panel faces the sun on both sides of the road. We can unfold on the north side of the road and fold on the south side of the road in the northern hemisphere. We can unfold on the north side of the road and fold on the north side of the road in the southern hemisphere. The great thing about this foldable model is you can flexibly adjust the solar panel to face the sun on both sides of the road.

Installing our new integrated solar led street lamp requires only two steps.
Step 1: Connect the cables between the solar panel and the lamps in step one.
Step 2: Use 6 screws to secure an integrated solar street light.

There are also three simple installation tips for integrated solar street lights. Follow these tips before installing your first All-in-One Solar Street Light to avoid problems with its operation.

1. At 2:00 p.m., ensure that the solar panel orientation faces the sun
Because the solar panel is a fixed component, make certain that the solar panel orientation faces the direction of the sun at its highest peak when you install the solar street light. This is between 12:00 and 2:00 p.m. The sun's intensity is very high during these hours, and your solar panel can receive as much energy as it can. To make your solar street light work more efficiently, make sure the panel is oriented so that it faces the sun at 2 p.m.

2. Pole should not be too close to the lamp in case of shadows on the solar panel
keep a short distance between the pole and the lamp. This tip will help you maximize the efficiency of your solar panel and ensure that your battery is fully charged.

3. Trees or buildings should not be too close to the lamp in case of shadows on the solar panel
Our country is now paying more attention to greening projects, which has resulted in many solar streetlight projects that will follow greening projects. However, during summer thunderstorms, the trees near the solar streetlights are easily blown down, destroyed, or directly damaged by strong winds. As a result, the trees surrounding the solar streetlight should be pruned on a regular basis, especially during the summer, when plants grow wild. Ensuring that trees grow steadily can help to reduce the damage caused by dumping trees to solar streetlights.

Shenzhen Moonlight Technology Co.,Ltd (Brand name Cmoonlight) is a professional solar powered street light manufacturer in China with high quality and over ten years of experience. All-in-One Solar Led Street Light, All-in-Two Solar Led Street Light, and Solar Light Post are among our products. For Saudi Arabia, we have IP67, IK10, SC, GS, COC, and CB IECEE Saber certifications. Cmoonlight has 20,000 square metres of factory space, 245 employees, and customers from over 180 countries. We spent an entire year inventing foldable all-in-one solar led street light to replace standard all-in-one solar led street light, with hundreds of details designed.

 
 
 
Navigation